Eagle 1 to 6 Gas Portable Monitor

  • Simultaneous detection of up to 6 different gases
  • Over 400 gas monitoring configurations
  • Wide range of toxic gases
  • PPM / LEL hydrocarbon detection
  • Powerful long-life pump up to 125’ range with filters
  • Up to 30 hours of continuous operation
  • Dual hydrophobic filters (most versions)
  • IR Sensors available for CO2, % LEL CH4 or HC, % volume CH4 or HC
  • Transformer testing version available
  • Intrinsically safe design, CSA (C / US) & UL classified (most versions)
  • Complies with EPA Method 21

The Eagle is the most versatile portable gas detector on the market. Equipped with features that are not available on most competitive units, the EAGLE is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. Detection combinations never before offered in a portable gas monitor are now available featuring the industry’s widest selection of high quality, long life and field proven sensors.

Unique EAGLE features include PPM or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2, methane or hydrocarbons in LEL and % volume ranges; a methane elimination switch for environmental applications, a long list of super toxic gases and measurable ranges, and dual hydrophobic filters that increases its water resistant performance. The EAGLE has a strong internal pump with a low flow auto shut off and alarm, which can draw samples from up to 125 feet even with the dual hydrophobic filters in place. This allows for quick response and recovery from distant sampling locations. The EAGLE will continuously operate for over 30 hours on alkaline batteries or 18 hours on Ni-Cads. A variety of accessories are also available to help satisfy almost any application such as long sample hoses, special float probes for tank testing, datalogging, continuous operation adapters, remote alarms and strobes, and dilution fittings, just to name a few.



  • Simultaneous detection of up to 6 different gases
  • Over 400 gas monitoring configurations
  • Wide range of toxic gases
  • PPM / LEL hydrocarbon detection
  • Powerful long-life pump up to 125’ range with filters
  • Up to 30 hours of continuous operation
  • Dual hydrophobic filters (most versions)
  • IR Sensors available for CO2, % LEL CH4 or HC, % volume CH4 or HC
  • Transformer testing version available
  • Intrinsically safe design, CSA (C / US) & UL classified (most versions)
  • Complies with EPA Method 21
EnclosureWeather resistant, chemical resistant, RF/EMI coated high impact polycarbonate polyester blend. Can be set in rain or into 2.5 inches of water without damage. Ergonomically balanced with rugged top mounted handle.
Dimensions10.5″ long x 5.9″ x 7″ tall
Weight5 lbs.
Detection PrincipleCatalytic combustion, electrochemical cell, galvanic cell, and infrared.
Sensor Life2 years under normal conditions.
Sampling MethodPowerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH.
Display4 x 20 LCD readout with backlighting. Viewed through window in case top. Displays readings & status of all channels simultaneously.
Alarms2 alarms per channel plus TWA and STEL alarms. Fully adjustable for levels, latching or self reset and silenceable.
Alarm MethodBuzzer 85dB at 30 cm, dual high intensity LED’s, and blinking display.
Controls6 external push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA /STEL values, battery status and many other features.
Continuous Operating Hours30 hours minimum using alkaline batteries, or 18 hours using Ni-Cads.
Power SourceSize D batteries, 4 alkaline or Ni-Cad. Charger has alkaline recognition to prevent battery damage if alkalines are charged.
Operating Temp. & Humidity-10°C to 40°C (14°F to 104°F), 0 to 95% RH, non-condensing.
Indication AccuracyMaximum variance +/- 5% of full scale.
Response Time30 seconds to 90% (for most gases).
Safety DesignIntrinsically Safe, Class I, Division 1, Groups A, B, C and D. CSA / NRTL & UL Classified (most versions).
Standard AccesoriesShoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose (for special toxic gas versions, shorter teflon hose used without probe).
Optional Accessories• Datalogging of up to 4 gases (No datalogging possible on 5 or 6
gas versions or versions with more than 2 toxic sensors)
• Remote alarm
• Dilution fitting (50/50)
• Ni-Cad batteries
• Battery charger, 115 VAC, 220 VAC, or 12 VDC
• Continuous operation adapter, 115 VAC or 12 VDC
• Extra loud buzzer
• Extension probes
• External hydrophobic filter
WarrantyOne year material and workmanship
Gas
Measuring Range
Accuracy
* Which ever is greater
Standard Confined Space Gases
Hydrocarbons
(CH4, std)
0 – 100% LEL± 5% of reading or ± 2% LEL (*)
0 – 50,000 ppm± 50 ppm or ± 10% of reading (*)
Oxygen (O2)0 – 40% Vol.± 0.5% O2
Carbon Monoxide (CO)0 – 500 ppm± 5% of reading or ± 5 ppm CO (*)
Hydrogen Sulfide (H2S)0 – 100 ppm± 5% of reading or ± 2 ppm H2S (*)
Super Toxics and Other Gases
Ammonia (NH3)0 – 75 ppm
± 10% of reading or ± 5% of full scale (*)
Arsine (AsH3)0 – 1 ppm
0 – 200 ppb
Chlorine (Cl2)0 – 3 ppm
Chlorine Dioxide (ClO2)0 – 1 ppm
Fluorine (F2)0 – 5 ppm
Hydrogen Fluoride (HF)0 – 9 ppm
Hydrogen Chloride (HCl)0 – 15 ppm
Hydrogen Cyanide (HCN)0 – 30 ppm
Hydrogen Selenide (H2Se)0 – 0.2 ppm
Hydrogen Sulfide (H2S)0 – 1 ppm
0 – 30 ppm
Nitrogen Dioxide (NO2)0 – 15 ppm
Ozone (O3)0 – 1 ppm
Nitric Oxide (NO)0 – 100 ppm
Phosphine (PH3)0 – 1 ppm
Silane (SiH4)0 – 15 ppm
Sulfur Dioxide (SO2)0 – 6 ppm
IR Sensors
Carbon Dioxide (CO2) (IR Sensor)0 – 5,000 ppm
0 – 10,000 ppm
0 – 5% Vol.
0 – 20% Vol.
0 – 60% Vol.
± 5% of reading or ± 2% of full scale (*)
Methane (CH4) (IR Sensor)0 – 100% LEL
0 – 100% Vol.
Isobutane (iC4H10) (IR Sensor)0 – 100% LEL
0 – 30% Vol.



Driven By Values, Delivering On A Vision.