PORTABLE GAS DETECTOR
We offer next generation Portable equipment. Wide range of gas measuring solution for
6 Operating modes Smallest 6 gas sample draw detector (H2S, CO, O2,HC and two toxic gases/VOC) 2 Interchangeable smart sensor slots 4 PID options: 10.6 (2 ranges) eV, 10.0 eV, and 11.7 eV lamps
Monitor up to 6 different gases Specialty Sensors Infrared (IR)CO2, % LEL CH4, % Vol. CH4, % LEL HC, % Vol. HC PID (Photoionization Detector) Smart toxic, plug and play sensors (NH3, AsH3, Cl2, HCN, PH3, & SO2)
Base gas is selectable from 3 gases (Air, N2 and CO2) Target gas is selectable: Direct reading is selectable from 5 gases Only 1 gas(CH4) is required for calibration Pump booster function: Higher pump rate gives faster sampling and long-distance suction
Combustible gases are detectable at ppm range Target gas is selectable: direct reading is selectable from a list of 25 gases. Calibration to only 1 gas (CH4) is needed. Pump booster function: Pump speed selectable from 0.35L/min to 0.6L/min. Gas can be sampled faster or longer distance with higher pump rate.
Specifically monitor for benzene at a range of 0.01 – 50 ppm by filtering out all other VOC’s. Detect the BTEX family of VOC’s including benzene, toluene, ethylbenzene, and xylene Two PID sensors functioning in one instrument Benzene Select Mode takes timed samples using pre-filter tube
The FP-31 is a highly sensitive portable gas detector specific for formaldehyde detection. It uses a photoelectric photometry method which utilizes colorimetric tablets for detection. The FP-31 then has a direct readout of the formaldehyde measurement on an easy to read LCD display