RKI’s paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free gas detection. The FP-330 is equipped with an easily replaceable tape that is highly specific to Formaldehyde. This model is equipped with a digital display showing the type of gas and concentration in PPM. The FP-330 will also display remaining tape life as well as an end of tape alarm.
The FP-330 has audible and visual alarms, as well as alarm relay contacts and 4-20mA output. A unique “Tape Saver mode” extends tape life in applications where high background gas levels may be present.
The FP-330 meets and exceeds OSHA and NIOSH compliance requirements, and does not respond to interfering gases (hydrocarbons, alcohols, solvents, CO, etc.) that may be present in industrial/manufacturing environments. FP 330
- Small and compact
- Highly sensitive and ideal for low level formaldehyde concentrations
- Interference-free detection
- Easy detection tape replacement with plug-in cassette
- Tape remainder display and tape end warning alarm provided
- PPM digital display
- Easily transportable
- 115 VAC powered
- Alarm relays
- 4-20mA output
- Furniture and woodworking
- Coating and varnishing
- Engineered wood products
- Medical / veterinary
- Painting & corrosion resistant finishes
- Carpet manufacture & storage
- Heat treatment operations
- Manufactured homes/trailer/RV inspection
FP-330 HCHO 0 – 0.500 ppm
FP-330 HCHO 0 – 1.00 ppm
FP-330 HCHO 0 – 5.00 ppm
|Photoelectric photometry method using tape cassette|
|Detection tape||Plug in cassette, 65-FCL-018|
|Detection gas||Formaldehyde (HCHO)|
|Alarm point||1st 0.080ppm|
Latching alarm (standard) or non-latching (option)
2m (teflon only)
+/-20% of indication value + 1 digit
|Tape operation time|
1 month with no background gas. (see note below)
Warning and alarm with audible and visual indications
Low flow, tape cut, sensor failure, etc.
|External output signal|
4-20mA (load resistance: below 300Ω)
|Operating temperature & humidity|
5~35°C 20~60% RH (non condensing)
OD 6mm with fittings
|Power supply & power|
100VAC to 220VAC universal power,
|Dimensions & weight|
Approx. 6.5″(W) x 7.8″(H) x 10.4″(D)
164 (W) x 198 (H) x 263 (D) mm, 6.5kg
When HCHO exists in the background continuously over 0.03 ppm, the tape on FP-330 advances after every measurement, so the tape is consumed very quickly. In this case, to extend operating time, the Tape Saver mode is provided on the FP-330.
Tape Saver mode is available for all three ranges;
0H: Normal operation.
1H: One measurement during one hour. Tape lasts 15 days with constant background level.
2H: One measurement during two hours. Tape lasts 30 days with constant background level.
Specifications subject to change without notice.
|Gas||TLV||Detection Range||Resolution||1st alarm||2nd alarm||Tape No.|