SDM-6000

SDM 6000

  • Stand-alone station (no PC Required)
  • Charge, calibrate, bump test, and alarm test
  • Included software collects calibration, bump test, alarm history, and exposure date from instruments
  • Automatically power instruments on / off for scheduled calibration
  • Accepts GX-6000 with or without rubber boot

    Contact Our Sales





    • Description
    • Application
    • Specifications
    • Download
    • Ordering Info

    The SDM-6000 is a versatile maintenance tool that automates the service of a GX-6000 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via SD card (PC software and SD card included).

    Modular Design
    SDM-6000 calibration stations are modular by design and can easily connect to each other without the need of any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 SDM-6000 calibration stations.

    Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.

    • Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
    • No tubing, adaptors or wires needed to connect
    • One power source for all stations
    • Configure GX-6000 parameters
    • Centralize instrument data from multiple stations
      and locations to one network location
    • Ethernet port for LAN connectivity
    • Schedule automatic calibration / bump test
    • Optional valve expansion module for up to six gas cylinders
    • Optional battery operated printer
    DisplayTouch panel TFT liquid crystal (3.5 inch, 320×240 image element QVGA, RGB1677 million colors) Back light
    LED3 color [Green, Red, Orange]. Each status is indicated by Lighting / Blinking
    BUMP test

    Standard setting values

    AIR Flush time: 15sec, GAS time: 20sec, AIR Purge time: 5sec

    Threshold value: ±50%, Auto Calibration: OFF, Auto alarm function check: ON

    Auto print: OFF

    Setting range

    AIR Flush time: 15~120sec

    GAS time: 20~120sec

    AIR Purge time: 5~120sec

    Threshold value: ±10~50%

    Auto calibration: ON, OFF

    Auto alarm function check: ON, OFF

    Auto print: ON, OFF

    Bump test result: Displayed on TFT liquid crystal

    Calibration

    Standard setting values

    AIR Flush time: 30sec, GAS time: 90sec, AIR Purge time: 30sec

    Auto alarm function check: ON, Auto print: OFF

    Setting ranges

    AIR Flush time: 15~120sec

    GAS time: 20~120sec

    AIR Purge time: 5~120sec

    Auto alarm function check: ON, OFF

    Auto print: ON, OFF

    Calibration result: Displayed on touch screen display

    Power (AC adaptor)100~240VAC~50/60Hz
    Dimension, weight5.11”(W) x 13’(H) x 7.2”(D)in Approx. 3.7lb
    Operation temperature, humidity0~104F, below 95~RH (no condensing)
    USB printer portA type: Connects SDM-6000 printer (SII, DPU-S245) via USB cable
    RJ-45 connectorEthernet port for a LAN connection
    SD card slotCompatible with SD & SDHC cards
    Joint connectorConnecting SDM-6000 (Max 10 units) and SV-3
    Inlet4 inlets: GAS 1 / GAS 2 / GAS 3 / AIR
    CertificationCE marking
    Standard FunctionsCharging, Cal. cap fitting status monitoring, Power ON function, Alarm activation check, multi language (English, German, Japanese, Korean, Russian, Portuguese, Spanish, Italian, French), backlight adjusting, buzzer function, self-diagnosis for instruments connection
    Standard accessoryOperating manual, filter, connecting plate, wall mount plate, PC controller software
    SoftwarePC controller software included as standard. Windows 7 & 10 compatible
    Optional accessory

    SV-3 solenoid valve adds 3 additional calibration gas inputs

    AC adaptor (15W output), AC adaptor (100W output)

    Calibration Station utility software

    Calibration gas & regulators

    Tubing

    Battery powered printer

    Download datasheet

    The SDM-6000 can be ordered using the part numbers from the list below.

    Docking Station

    81-SDM6000GX-6000 docking station with particle filter, connection brackets, SD Card, & USB SD card reader.
    81-SDM6000-01Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, and single unit AC adapter
    81-SDM6000-02Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, and multi-unit AC adapter
    81-SDM6000-03Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, demand flow regulator, and cal gas tubing
    81-SDM6000-04Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, demand flow regulator, cal gas tubing, 58AL cyl H2S/CO/CH4/O2, and cylinder holder
    81-SDM6000-05Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, demand flow regulator, cal gas tubing, 58AL cyl 100 ppm isobutylene/H2S/CO/CH4/O2, and cylinder holder
    81-SDM6000-06Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, demand flow regulator, cal gas tubing, 34AL cyl 100 ppm isobutylene/air, and cylinder holder
    81-SDM6000-07SDM-6000 calibration station for GX-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, demand flow regulator, cal gas tubing, 34AL cyl H2S/CO/CH4/O2, and cylinder holder
    81-SDM6000-08SDM-6000 calibration station for GX-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, 2 demand flow regulators, cal gas tubing, 34AL cyl H2S/CO/CH4/O2, 34AL HCN/N2, and 2 cylinder holders
    81-SV3SV-3 solenoid valve unit, with connection brackets, for 6 cylinder expansion with SDM-6000

    Driven By Values, Delivering On A Vision.